HP Officejet 7310 - Connect using the HP bt300 Bluetooth Wireless Printer Adapter

background image

Connect using the HP bt300Bluetooth Wireless Printer
Adapter

The HP bt300 allows you to print images from most Bluetooth devices directly to your
HP all-in-one without a cable connection. Simply insert the HP bt300 into the PictBridge
camera port located on the front of the HP all-in-one and print from a Bluetooth device
such as a PDA or camera phone.

Note

Using Bluetooth technology to print from a PC or laptop to your HP all-in-one is
not supported at this time.

To connect the HP bt300 to your HP all-in-one

1

Insert the HP bt300 into the PictBridge camera port (shown in the graphic below).

Note

If you insert the HP bt300 into your HP all-in-one and a message displays on
your color graphics display that says

No Bluetooth

, disconnect the adapter

from the HP all-in-one and refer to

Device update

.

2

Some Bluetooth devices exchange device addresses when they communicate with
each other and establish a connection. If your Bluetooth device requires the
address of your HP all-in-one to make a connection:
a

Press

Setup

on the control panel of your HP all-in-one.

The

Setup Menu

appears on the color graphics display.

b

Press

0

, then press

1

.

This displays the

Bluetooth

menu and then selects

Device Address

.

The

Device Address

for your HP all-in-one displays. It is read only.

c

To enter the address into your device, follow the instructions that came with
your Bluetooth device.

User Guide

19

Connection information

background image

3

Some Bluetooth devices display the printer's device name when connected. If your
Bluetooth device displays the printer's name:
a

Press

Setup

on the control panel of your HP all-in-one.

The

Setup Menu

appears on the color graphics display.

b

Press

0

, then press

2

.

This displays the

Bluetooth

menu and then selects

Device Name

.

The

Device Name

screen appears.

Note

Your HP all-in-one ships with a predefined name for your HP all-in-one:
TBD.

c

Use the visual keyboard on the

Device Name

screen to enter a new name.

For more information on using the visual keyboard, see

Enter text and symbols

.

d

When you have finished entering a name for your HP all-in-one, highlight

Done

on the visual keyboard and press

OK

.

The name you entered will appear on your Bluetooth device when you
connect to the HP all-in-one to print.