HP Officejet 7310 - Set up your HP all-in-one to a computer with two phone ports

background image

Set up your HP all-in-one to a computer with two phone ports

Back view of the HP all-in-one

1 Telephone wall jack
2 "IN" phone port on your computer
3 "OUT" phone port on your computer
4 Telephone
5 Computer with modem
6 Phone cord supplied in the box with your HP all-in-one connected to the "1-LINE" port

To set up your HP all-in-one to a computer with two phone ports

1

Remove the white plug from the port labeled "2-EXT" on the back of your HP all-
in-one.

2

Find the phone cord that connects from the back of your computer (your PC
modem) to a telephone wall jack. Disconnect the cord from the telephone wall jack
and plug it into the port labeled "2-EXT" on the back of your HP all-in-one.

3

Connect a phone to the "OUT" port on the back of your PC modem.

Chapter 10

98

HP Officejet 7300/7400 series all-in-one

Fax setup

background image

4

Using the phone cord supplied in the box with your HP all-in-one, connect one end
to your telephone wall jack, then connect the other end to the port labeled "1-LINE"
on the back of your HP all-in-one.

Caution

If you do not use the supplied cord to connect from the telephone

wall jack to your HP all-in-one, you might not be able to fax successfully.
This special phone cord is different from the phone cords you might already
have in your home or office. If the supplied phone cord is too short, see

The

phone cord that came with my HP all-in-one is not long enough

for

information on extending it.

5

If your PC modem software is set to receive faxes to your computer automatically,
turn off that setting.

Caution

If you do not turn off the auto fax receive setting in your modem

software, your HP all-in-one will not be able to receive faxes.

6

Set up the HP all-in-one to answer incoming calls manually. Press the

Auto

Answer

button until the light is off.

7

Run a fax test. For information, see the next section,

Test your fax setup

.

You must be available to respond in person to incoming fax calls, or your HP all-in-one
cannot receive faxes. For information on receiving faxes manually, see

Receive a fax

manually

.