HP Officejet 7310 - Use error correction mode

Use error correction mode

Error Correction Mode

(ECM) eliminates data that is lost due to poor phone lines by

detecting errors that occur during transmission and automatically requesting
retransmission of the erroneous portion. Phone charges are unaffected, or might even
be reduced, on good phone lines. On poor phone lines, ECM increases sending time
and phone charges, but sends the data much more reliably. The default setting is on.
Turn ECM off only if it increases phone charges substantially, and you can accept
poorer quality in exchange for reduced charges.
The following rules apply to ECM:
●

If you turn ECM off, this applies only to faxes that you send. This does not apply to
faxes that you receive.

●

If you turn ECM off, set the

Fax Speed

to

Medium

. If the

Fax Speed

is set to

Fast

,

the fax will automatically be sent with ECM on. For information on changing the

Fax

Speed

, see

Set the fax speed

.

●

If you send a fax in color, the fax will be sent with ECM on, regardless of the option
currently set.

To change the ECM setting from the control panel

1

Press

Setup

.

2

Press

5

, and then press

6

.

This displays the

Advanced Fax Setup

menu and then selects

Error Correction

Mode

.

3

Press to select

Off

or

On

.

4

Press

OK

.